Identificador: 265
Abierta
MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
AMXmachinery
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"
PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”,
6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8"
USED - VERY GOOD CONDITIONS
North American
Gladu hydro-lock
6 wing
20 degrees
Interior diameter (bore): 1-13/16”
External diameter: 6” (150 mm)
Lenght 2-1/4” (57 mm)
Lenght 3” (75 mm)
Lenght 4” (102 mm)
Lenght 5” (130 mm)
Lenght 6” (152 mm)
AMXmachinery
CLAVADORA NEUMATICA PARA PISOS DE MADERA Y MACHIMBRE
PARTE: 2HR-64268 - CLAVADORA NEUMATICA - PARA PISOS DE MADERA Y MACHIMBREAir inlet size: 1/4 in. NPTAverage air consumption: 0.9 CFM @ 90 PSICapacity: 100 cleat nails / 80 staplesFastener length (in.): 1 in. to 2 in.Gauge: 15-1/2 to 16 GAProduct Height: 23 in.Product Length: 18 in.Product Weight: 11.1 lbs.Product Width: 3-1/8 in.Shipping Weight: 15.95 lb.Size(s): 16 gauge 1-1/2 in. to 2 in. long L-cleat nails and 15-1/2 gauge 1 in. to 2 in. flooring staplesWorking pressure (psi): 70-90 PSI
AMXmachinery
SISTEMA DE PINTURA - MONTAJE EN CARRO
SISTEMA DE PINTURA - MONTAJE EN CARROSISTEMA PARA APLICACION EN MADERAAplicación de tintes, sellantes, lacas y capas finales para:• Muebles y armarios de madera• Ventanas y puertas de madera• Madera personalizada Uso de una amplia gama de tecnologías:• Convencional• HVLP (alto volumen a baja presión)• Compliant• Pulverización electrostática con aire MODELOS DISPONIBLES DE BOMBA, MANGUERAS Y PISTOLA MODELOS:• 289638 – con Pistola AirPro HVLP, boquilla de 1,0 mm (0,040 ...
AMXmachinery
SIERRA CIRCULAR
PARTE: 1MK-HS7600 – SIERRA CIRCULAR – DIAMETRO 7-1/4” – 1,200W - MAKITANuevo con garantíaNuevo Diseño Estético con Agarre SuavePalanca de Acción Individual para un ajuste rápido con profundidad de corteEscape trasero para el aserrín, evitando que se disperse alrededor para proporcionar un funcionamiento cómodo.Potencia: 1,200WCapacidad máx. de Corte: A 0º 64mm (2-1/2") - A 45º 42mm (1-5/8")Diámetro del Disco: 185mm (7-1/4")Velocidad sin Carga: 5,200Dimensiones: 309x234x255mm...