Identificador: 1919
Abierta
Descripción
PARTE: 2LI-D - MEDIDOR DE HUMEDAD PARA MADERA – SIN PINS - LIGNOMAT – LIGNO-SCANNER D
Nuevo con garantía
Measuring | 5-60% dependent upon species setting* |
Display | 0.1% resolution for the entire range. |
Species | 71 wood group settings, or simply use specific gravity of the wood, between 0.3 and 1.0 (setting 30-100) |
Gypsum | N/A |
Reference | 0-99 for non-wood building materials |
Calibration | Stable calibration not affected by ambient temperature. Calibration is internally checked and automatically adjusted if necessary. |
Calibration Check | External calibration check block #TS is available to verify the calibration and functions of meter. |
Included | Pouch, one 9V battery, manual and laminated wood group chart. |
Size | Pocket-size 2″ x 5.5″x0.5″, Measuring pad 1 5/8″ x 2 5/8″ |
Weight | 8 ounces (200g), made out of high-impact plastic |
Warranty | All moisture meters have a 2 year warranty. Pins and battery are excluded. |
The measuring depth of a pinless meter is crucial. Moisture readings are too low, when the Scanner is placed on a work piece which is thinner than the measuring depth. Scanners never measure any deeper than the measuring depth.
The entire measuring pad has to be on a flat and smooth surface for accurate readings
*Species Corrections for Ligno-Scanners and Ligno-VersaTec correlate directly to the Specific Gravity. Example: For a specific gravity of 0.57 (0.57g/cm 3 )set species # 57. Specific Gravity for most wood species can be found on the Internet. We also include a Species Chart with recommended settings.
The Ligno-Scanners SDM and the Ligno-VersaTec have calibrations built-in for drywall and concrete and a reference scale for non-wood building materials.
Measuring range: 5-60% dependent upon Species. For hardwoods the Scanners read lower than 5%, for softwoods the Scanners start reading above 5%. Resolution of read-out: 0.1% Less accurate above Fiber Saturation Point at 30%.
Wood temperature correction is not necessary.
1 9-V Battery for 3000 Readings, Battery included
Size: 1/2″H x 2″L x 5″W (for Scanner LD width is 2 7/8″) Weight: 8 ozs
Comes in a Carry Pouch with Belt Loop.
Pago y Devoluciones
- Forma de pago
- PayPal
Envio
- Ubicación de elemento de riesgo
- 31627, Chihuahua, México
- Enviar a
- México
- Retiros
- no recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
Banderas De Señalización
PARTE: 1SIL-DC-EQ-BAND - Banderas De SeñalizaciónBanderas de señalización de PVC en rollo con 30mLas cintas con leyendas como peligro, precaución entre otras son de gran utilidad para demarcar zonas en donde lo necesites.
AMXmachinery
PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO
PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO
NUEVA EN SU CAJA ORIGINALUse
your router to make strong, beautiful dovetail jointsCut
tails, pins, half-blind and standard dovetailsMale
and female dovetail cuts can be made in one passCam-lock
clamps quickly secure workpieceAccepts
stock up to 12 in. wide, 1-1/4 in. thickProduct
Height: 10-1/4 in.Product
Length: 15-3/4 in.Product
Width: 17 in.
Shipping
Weight: 17.40 lb.
AMXmachinery
Bastón Luminoso
PARTE: 1SIL-DC-EQ-BAST - Bastón LuminosoDimensiones:Diámetro 4 cmLargo 54 cmBaterías: 2 baterías DAjuste de luz constante e intermitente50 piezas por cajaEl bastón luminosos es un a herramienta manual que ayuda a advertir peligros de forma manual en zonas de poca visibilidad o en lugares obscuros.
AMXmachinery
LIJA BANDA - MEDIDA 152 MM X 2.52 MM
PARTE: SIL-R-HVS00100-B060 - LIJA BANDA - MEDIDA 152 MM X 2.52 MM - GRANO 60 PARA LIJADORAS DE BANDA Y LIJADORAS DE BASTONESPARTE DESCRIPCION GRANOSIL-R-HVS00100-B060 - LIJA BANDA - MEDIDA 152 MM X 2.52 MM - GRANO 60